EN / RU / ES / FR / DE

OBDII/EOBD diagnostics trouble codes definition

If your car is equipped with OBD-II or EOBD, you can access over 5,000 generic OBD-II diagnostic trouble codes (DTCs). These codes cover various vehicle systems, including Powertrain (P0XXX, P2XXX, P34XX), Body (B0XXX), Chassis (C0XXX), and Network/Communication (U0XXX, U2XXX, U3XXX). Additionally, there are more than 13,500 manufacturer-specific OBD-II codes available for diagnosing issues unique to different car brands and models. Make sure you're equipped with the right tools to understand and resolve these trouble codes to keep your vehicle running smoothly.

By using these OBD-II codes, you can effectively diagnose issues related to engine performance, safety features, suspension, and more.

Supported manufacturers with specific OBD2 codes:

Enter code:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error P0695

OBDII error code P0695 is a generic trouble code that indicates a problem with the Fan 3 Control Circuit Low. This code is triggered when the Engine Control Module (ECM) detects a low voltage signal in the Fan 3 control circuit. The Fan 3 control circuit is responsible for controlling the operation of the cooling fan, which is essential for maintaining the proper operating temperature of the engine.

In modern vehicles, the cooling fan is typically controlled by the ECM, which receives input from various sensors, such as the coolant temperature sensor, to determine when to turn the fan on or off. The Fan 3 control circuit is usually a 12-volt circuit that supplies power to the fan motor. When the ECM detects a low voltage signal in this circuit, it sets the P0695 code and illuminates the Check Engine Light (CEL) to alert the driver of a potential problem.

Possible Causes of Error P0695

  • Faulty or corroded wiring in the Fan 3 control circuit
  • Low battery voltage or a weak battery
  • Faulty or malfunctioning Fan 3 control module
  • Short circuit in the Fan 3 control circuit
  • Open circuit in the Fan 3 control circuit
  • Faulty or malfunctioning Engine Control Module (ECM)
  • Incorrect or loose connections in the Fan 3 control circuit
  • Fan 3 motor failure or malfunction

Possible Fixes for Error P0695

  • Inspect the wiring and connections in the Fan 3 control circuit for signs of damage, corrosion, or wear. Repair or replace as necessary.
  • Check the battery voltage and charging system to ensure it is functioning properly. Charge or replace the battery if necessary.
  • Use a scan tool to monitor the Fan 3 control circuit voltage and verify that it is within the manufacturer''s specified range.
  • Check the Fan 3 control module for signs of malfunction or failure. Replace if necessary.
  • Perform a visual inspection of the Fan 3 motor and its connections. Replace the motor if it is faulty or malfunctioning.
  • Consult the vehicle''s repair manual or a professional mechanic for further diagnosis and repair guidance.
Can't find the right OBDII code in the catalog? Get professional advice from our smart assistant and find out the exact cause of the problem today!

Chat