EN / RU / ES / FR / DE

OBDII/EOBD diagnostics trouble codes definition

If your car is equipped with OBD-II or EOBD, you can access over 5,000 generic OBD-II diagnostic trouble codes (DTCs). These codes cover various vehicle systems, including Powertrain (P0XXX, P2XXX, P34XX), Body (B0XXX), Chassis (C0XXX), and Network/Communication (U0XXX, U2XXX, U3XXX). Additionally, there are more than 13,500 manufacturer-specific OBD-II codes available for diagnosing issues unique to different car brands and models. Make sure you're equipped with the right tools to understand and resolve these trouble codes to keep your vehicle running smoothly.

By using these OBD-II codes, you can effectively diagnose issues related to engine performance, safety features, suspension, and more.

Supported manufacturers with specific OBD2 codes:

Enter code:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error P053B

The OBDII error code P053B indicates a problem with the Positive Crankcase Ventilation (PCV) heater control circuit. The PCV system is responsible for reducing emissions by recirculating the gases that build up in the engine''s crankcase. The PCV heater is used to improve the efficiency of the system, especially during cold engine operation. The P053B error code is set when the Engine Control Module (ECM) detects a low voltage condition in the PCV heater control circuit.

In a normal operating condition, the ECM supplies a voltage signal to the PCV heater to regulate its operation. If the voltage signal is lower than the specified range, the ECM will set the P053B error code and illuminate the Check Engine Light (CEL). This error code can cause the engine to run rough, decrease fuel efficiency, and increase emissions.

Possible Causes of Error P053B

  • Faulty PCV heater
  • PCV heater circuit wiring or connector damage
  • Corrosion or water intrusion in the PCV heater circuit
  • Low battery voltage or weak battery
  • Faulty ECM or PCM
  • Wiring or connector issues between the ECM and PCV heater
  • PCV heater relay failure
  • Faulty fuel pressure sensor or fuel system issues

Possible Fixes for Error P053B

  1. Inspect the PCV heater circuit wiring and connectors for damage or corrosion and repair or replace as needed
  2. Check the battery voltage and charging system to ensure proper operation
  3. Replace the PCV heater if it''s faulty
  4. Check the ECM and PCM for any software updates or reflash the module if necessary
  5. Replace the PCV heater relay if it''s faulty
  6. Perform a fuel system pressure test to ensure proper fuel pressure
  7. Clear the error code and monitor the engine operation to see if the problem persists

Chat