EN / RU / ES / FR / DE

OBDII/EOBD diagnostics trouble codes definition

If your car is equipped with OBD-II or EOBD, you can access over 5,000 generic OBD-II diagnostic trouble codes (DTCs). These codes cover various vehicle systems, including Powertrain (P0XXX, P2XXX, P34XX), Body (B0XXX), Chassis (C0XXX), and Network/Communication (U0XXX, U2XXX, U3XXX). Additionally, there are more than 13,500 manufacturer-specific OBD-II codes available for diagnosing issues unique to different car brands and models. Make sure you're equipped with the right tools to understand and resolve these trouble codes to keep your vehicle running smoothly.

By using these OBD-II codes, you can effectively diagnose issues related to engine performance, safety features, suspension, and more.

Supported manufacturers with specific OBD2 codes:

Enter code:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error P0460

The OBDII error code P0460 refers to a problem with the Fuel Level Sensor "A" Circuit. This sensor is responsible for monitoring the fuel level in the vehicle''s fuel tank and sending the information to the Engine Control Module (ECM). The ECM uses this data to calculate fuel consumption, determine when to turn on the fuel pump, and provide accurate fuel level readings to the driver.

The Fuel Level Sensor "A" Circuit is usually located in the fuel tank and consists of a float arm and a variable resistor. As the fuel level changes, the float arm moves, varying the resistance in the circuit. The ECM interprets this resistance change as a fuel level reading.

When the ECM detects an issue with the Fuel Level Sensor "A" Circuit, it sets the P0460 error code and illuminates the Check Engine Light (CEL). This code can be triggered by a variety of problems, including a faulty fuel level sensor, a short or open circuit, or a malfunctioning ECM.

Possible Causes of Error P0460

  • Faulty Fuel Level Sensor: The fuel level sensor may be damaged or malfunctioning, causing incorrect readings.
  • Short or Open Circuit: A short or open circuit in the wiring harness or connector can prevent the fuel level sensor from sending accurate data to the ECM.
  • Corrosion or Water Damage: Corrosion or water damage to the fuel level sensor or its connector can cause electrical issues.
  • ECM Malfunction: In rare cases, the ECM itself may be malfunctioning, causing the P0460 error code.
  • Wiring Issues: Wiring problems, such as a broken or damaged wire, can disrupt communication between the fuel level sensor and the ECM.
  • Fuel Tank Issues: Problems with the fuel tank, such as a stuck or faulty fuel tank float, can affect the fuel level sensor''s accuracy.

Possible Fixes for Error P0460

  • Replace the Fuel Level Sensor: If the fuel level sensor is faulty, replace it with a new one.
  • Repair or Replace Wiring: Inspect the wiring harness and connector for damage or corrosion and repair or replace as needed.
  • Check and Clean the Fuel Tank: Inspect the fuel tank and fuel tank float for any issues and clean or replace as needed.
  • Use a Scan Tool: Use a scan tool to monitor the fuel level sensor''s data and identify any patterns or issues.
  • Consult a Professional: If the problem persists, consult a professional mechanic for further diagnosis and repair.
Can't find the right OBDII code in the catalog? Get professional advice from our smart assistant and find out the exact cause of the problem today!

Chat