EN / RU / ES / FR / DE

OBDII / EOBD Diagnose-Fehlercodes Definition

Wenn Ihr Auto mit OBD-II oder EOBD ausgestattet ist, haben Sie Zugriff auf über 5.000 generische OBD-II Diagnosefehlercodes (DTCs). Diese Codes decken verschiedene Fahrzeugsysteme ab, darunter Antriebsstrang (P0XXX, P2XXX, P34XX), Karosserie (B0XXX), Fahrwerk (C0XXX) und Netzwerk/Kommunikation (U0XXX, U2XXX, U3XXX). Zusätzlich gibt es mehr als 13.500 herstellerspezifische OBD-II-Codes, die dabei helfen, Probleme zu diagnostizieren, die spezifisch für verschiedene Automarken und -modelle sind. Stellen Sie sicher, dass Sie über die richtigen Werkzeuge verfügen, um diese Fehlercodes zu verstehen und zu beheben, damit Ihr Fahrzeug reibungslos läuft.

Mit diesen OBD-II-Codes können Sie effektiv Probleme im Zusammenhang mit Motorleistung, Sicherheitsfunktionen, Fahrwerk und vielen weiteren wichtigen Komponenten diagnostizieren.

Unterstützte Hersteller mit spezifischen OBD2 Codes:

Code eingeben:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error U0013

OBDII error code U0013 stands for ''Medium Speed CAN Communication Bus (+) Low''. This error code is related to the Controller Area Network (CAN) bus system in a vehicle. The CAN bus is a communication network that allows different electronic control units (ECUs) in the vehicle to exchange data and information. The Medium Speed CAN bus is a specific type of CAN bus that operates at a lower speed than the High Speed CAN bus, but higher than the Low Speed CAN bus.

The error code U0013 specifically refers to a problem with the Medium Speed CAN bus (+) circuit, which is the positive side of the bus. The error indicates that the voltage on this circuit is lower than expected, which can prevent the ECUs from communicating properly.

This error code can be caused by a variety of factors, including wiring problems, faulty ECUs, or issues with the CAN bus itself. It can also be triggered by other problems in the vehicle''s electrical system.

Possible Causes of Error U0013

  • Wiring problems, such as a short circuit or an open circuit, in the Medium Speed CAN bus (+) circuit
  • Corrosion or damage to the wiring or connectors in the Medium Speed CAN bus (+) circuit
  • A faulty or malfunctioning ECU that is connected to the Medium Speed CAN bus
  • A problem with the CAN bus itself, such as a faulty transceiver or a malfunctioning bus controller
  • Other electrical problems in the vehicle, such as a low battery voltage or a malfunctioning alternator
  • A software issue or a calibration problem with one or more of the ECUs connected to the Medium Speed CAN bus

Possible Fixes for Error U0013

  • Inspect the wiring and connectors in the Medium Speed CAN bus (+) circuit for any signs of damage or corrosion, and repair or replace them as needed
  • Use a scan tool to monitor the Medium Speed CAN bus (+) circuit and identify any problems with the voltage or communication on the bus
  • Check the ECUs connected to the Medium Speed CAN bus for any signs of malfunction or failure, and replace them if necessary
  • Use a multimeter to measure the voltage on the Medium Speed CAN bus (+) circuit and compare it to the manufacturer''s specifications
  • Consult the vehicle''s repair manual or a professional mechanic for further guidance on troubleshooting and repairing the Medium Speed CAN bus (+) circuit
  • Clear the error code and retest the vehicle to see if the problem has been resolved
Konnten Sie den richtigen OBDII-Code im Katalog nicht finden? Erhalten Sie professionelle Beratung von unserem intelligenten Assistenten und erfahren Sie noch heute die genaue Ursache des Problems.

Chat