EN / RU / ES / FR / DE

OBDII / EOBD Diagnose-Fehlercodes Definition

Wenn Ihr Auto mit OBD-II oder EOBD ausgestattet ist, haben Sie Zugriff auf über 5.000 generische OBD-II Diagnosefehlercodes (DTCs). Diese Codes decken verschiedene Fahrzeugsysteme ab, darunter Antriebsstrang (P0XXX, P2XXX, P34XX), Karosserie (B0XXX), Fahrwerk (C0XXX) und Netzwerk/Kommunikation (U0XXX, U2XXX, U3XXX). Zusätzlich gibt es mehr als 13.500 herstellerspezifische OBD-II-Codes, die dabei helfen, Probleme zu diagnostizieren, die spezifisch für verschiedene Automarken und -modelle sind. Stellen Sie sicher, dass Sie über die richtigen Werkzeuge verfügen, um diese Fehlercodes zu verstehen und zu beheben, damit Ihr Fahrzeug reibungslos läuft.

Mit diesen OBD-II-Codes können Sie effektiv Probleme im Zusammenhang mit Motorleistung, Sicherheitsfunktionen, Fahrwerk und vielen weiteren wichtigen Komponenten diagnostizieren.

Unterstützte Hersteller mit spezifischen OBD2 Codes:

Code eingeben:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error P2647

OBDII error code P2647 is a generic trouble code that indicates a problem with the Rocker Arm Actuator System on Bank 1. The Rocker Arm Actuator System is a hydraulic or electronic system that controls the movement of the rocker arms, which in turn operate the valves in the engine. The system is designed to improve fuel efficiency and reduce emissions by allowing the engine to run on a more efficient valve timing. When the system is stuck in the ''on'' position, it can cause a range of problems, including poor engine performance, reduced fuel efficiency, and increased emissions.

The error code P2647 is typically triggered when the Engine Control Module (ECM) detects a problem with the Rocker Arm Actuator System on Bank 1. The ECM may detect a problem with the system''s hydraulic pressure, electrical circuit, or mechanical components. When the error code is triggered, the ECM will store the code in its memory and illuminate the Check Engine Light on the dashboard.

Possible Causes of Error P2647

  • Low engine oil pressure or dirty engine oil
  • Blockages in the hydraulic circuit or faulty hydraulic pump
  • Short circuits or open circuits in the electrical wiring
  • Failed or faulty Rocker Arm Actuator System components
  • Corrosion or wear on the electrical connectors or mechanical components
  • Incorrectly installed or loose components
  • ECM software issues or calibration problems

Possible Fixes for Error P2647

  • Check the engine oil level and condition, and top off or change the oil as needed
  • Inspect the hydraulic circuit for blockages or leaks, and repair or replace components as needed
  • Check the electrical wiring for short circuits or open circuits, and repair or replace as needed
  • Replace the Rocker Arm Actuator System components if they are faulty or failed
  • Clean or replace the electrical connectors and mechanical components if they are corroded or worn
  • Check the ECM software and calibration, and update or reprogram as needed
  • Perform a system reset or relearn procedure to reset the Rocker Arm Actuator System