EN / RU / ES / FR / DE

OBDII / EOBD Diagnose-Fehlercodes Definition

Wenn Ihr Auto mit OBD-II oder EOBD ausgestattet ist, haben Sie Zugriff auf über 5.000 generische OBD-II Diagnosefehlercodes (DTCs). Diese Codes decken verschiedene Fahrzeugsysteme ab, darunter Antriebsstrang (P0XXX, P2XXX, P34XX), Karosserie (B0XXX), Fahrwerk (C0XXX) und Netzwerk/Kommunikation (U0XXX, U2XXX, U3XXX). Zusätzlich gibt es mehr als 13.500 herstellerspezifische OBD-II-Codes, die dabei helfen, Probleme zu diagnostizieren, die spezifisch für verschiedene Automarken und -modelle sind. Stellen Sie sicher, dass Sie über die richtigen Werkzeuge verfügen, um diese Fehlercodes zu verstehen und zu beheben, damit Ihr Fahrzeug reibungslos läuft.

Mit diesen OBD-II-Codes können Sie effektiv Probleme im Zusammenhang mit Motorleistung, Sicherheitsfunktionen, Fahrwerk und vielen weiteren wichtigen Komponenten diagnostizieren.

Unterstützte Hersteller mit spezifischen OBD2 Codes:

Code eingeben:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error P2618

The OBDII error code P2618 is a generic trouble code that indicates a problem with the crankshaft position signal output circuit. This circuit is responsible for sending a signal to the engine control module (ECM) from the crankshaft position sensor, which is used to determine the engine''s crankshaft position and rotation speed.

The crankshaft position sensor is usually located near the crankshaft and is used to monitor the crankshaft''s rotation and position. The sensor sends a signal to the ECM, which uses this information to control the engine''s ignition timing, fuel injection, and other engine functions.

When the ECM detects a low signal from the crankshaft position sensor, it will set the P2618 error code. This code indicates that the signal from the sensor is lower than expected, which can cause problems with the engine''s performance and operation.

Possible Causes of Error P2618

  • Bad or faulty crankshaft position sensor
  • Wiring issues, such as short circuits or open circuits, in the crankshaft position sensor circuit
  • Corrosion or damage to the crankshaft position sensor connector
  • Low battery voltage or a weak battery
  • ECM or PCM (Powertrain Control Module) malfunction
  • Bad or faulty crankshaft position sensor mounting bracket
  • Incorrect crankshaft position sensor installation
  • Wiring harness damage or chafing

Possible Fixes for Error P2618

  1. Check the crankshaft position sensor and its wiring for any signs of damage or corrosion. Replace the sensor or repair the wiring as needed.
  2. Use a multimeter to test the voltage and resistance of the crankshaft position sensor circuit.
  3. Check the ECM or PCM for any software updates or malfunctions. Update the software or replace the ECM/PCM if necessary.
  4. Check the battery voltage and charge the battery if necessary.
  5. Check the crankshaft position sensor mounting bracket for any signs of damage or corrosion. Replace the bracket if necessary.
  6. Check the wiring harness for any signs of damage or chafing. Repair or replace the wiring harness as needed.