EN / RU / ES / FR / DE

OBDII / EOBD Diagnose-Fehlercodes Definition

Wenn Ihr Auto mit OBD-II oder EOBD ausgestattet ist, haben Sie Zugriff auf über 5.000 generische OBD-II Diagnosefehlercodes (DTCs). Diese Codes decken verschiedene Fahrzeugsysteme ab, darunter Antriebsstrang (P0XXX, P2XXX, P34XX), Karosserie (B0XXX), Fahrwerk (C0XXX) und Netzwerk/Kommunikation (U0XXX, U2XXX, U3XXX). Zusätzlich gibt es mehr als 13.500 herstellerspezifische OBD-II-Codes, die dabei helfen, Probleme zu diagnostizieren, die spezifisch für verschiedene Automarken und -modelle sind. Stellen Sie sicher, dass Sie über die richtigen Werkzeuge verfügen, um diese Fehlercodes zu verstehen und zu beheben, damit Ihr Fahrzeug reibungslos läuft.

Mit diesen OBD-II-Codes können Sie effektiv Probleme im Zusammenhang mit Motorleistung, Sicherheitsfunktionen, Fahrwerk und vielen weiteren wichtigen Komponenten diagnostizieren.

Unterstützte Hersteller mit spezifischen OBD2 Codes:

Code eingeben:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error P260E

The OBDII error code P260E is a generic trouble code that indicates a problem with the Diesel Particulate Filter Regeneration Lamp Control Circuit. This circuit is responsible for controlling the regeneration process of the Diesel Particulate Filter (DPF), which is a critical component in modern diesel engines. The DPF is designed to capture and filter out particulate matter (soot) from the exhaust gases, and the regeneration process is necessary to clean the filter and maintain its efficiency.

The regeneration process involves injecting fuel into the exhaust system to heat up the DPF and burn off the accumulated soot. The regeneration lamp control circuit is responsible for controlling the timing and duration of the regeneration process. When the P260E error code is triggered, it means that there is a problem with this circuit, which can prevent the DPF from regenerating properly and lead to a range of problems, including reduced engine performance, decreased fuel efficiency, and increased emissions.

Possible Causes of Error P260E

  • Short circuit or open circuit in the regeneration lamp control circuit
  • Failed or faulty regeneration lamp control module
  • Corrosion or damage to the wiring or connectors in the regeneration lamp control circuit
  • Failed or faulty DPF sensor or temperature sensor
  • Incorrect or corrupted software calibration in the engine control module (ECM)
  • Failed or faulty ECM or powertrain control module (PCM)
  • Low fuel pressure or poor fuel quality
  • Clogged or dirty DPF

Possible Fixes for Error P260E

  • Use a scan tool to clear the error code and test the regeneration lamp control circuit
  • Inspect the wiring and connectors in the regeneration lamp control circuit for corrosion or damage and repair or replace as needed
  • Replace the regeneration lamp control module if it is faulty or failed
  • Replace the DPF sensor or temperature sensor if it is faulty or failed
  • Update the software calibration in the ECM if it is incorrect or corrupted
  • Replace the ECM or PCM if it is faulty or failed
  • Check and maintain the recommended fuel pressure and quality
  • Clean or replace the DPF if it is clogged or dirty