EN / RU / ES / FR / DE

OBDII / EOBD Diagnose-Fehlercodes Definition

Wenn Ihr Auto mit OBD-II oder EOBD ausgestattet ist, haben Sie Zugriff auf über 5.000 generische OBD-II Diagnosefehlercodes (DTCs). Diese Codes decken verschiedene Fahrzeugsysteme ab, darunter Antriebsstrang (P0XXX, P2XXX, P34XX), Karosserie (B0XXX), Fahrwerk (C0XXX) und Netzwerk/Kommunikation (U0XXX, U2XXX, U3XXX). Zusätzlich gibt es mehr als 13.500 herstellerspezifische OBD-II-Codes, die dabei helfen, Probleme zu diagnostizieren, die spezifisch für verschiedene Automarken und -modelle sind. Stellen Sie sicher, dass Sie über die richtigen Werkzeuge verfügen, um diese Fehlercodes zu verstehen und zu beheben, damit Ihr Fahrzeug reibungslos läuft.

Mit diesen OBD-II-Codes können Sie effektiv Probleme im Zusammenhang mit Motorleistung, Sicherheitsfunktionen, Fahrwerk und vielen weiteren wichtigen Komponenten diagnostizieren.

Unterstützte Hersteller mit spezifischen OBD2 Codes:

Code eingeben:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error P071F

The OBDII error code P071F indicates that there is an issue with the Transmission Mode Switch "B" Circuit, specifically that the voltage in the circuit is higher than expected. The Transmission Mode Switch is responsible for sending signals to the Transmission Control Module (TCM) to indicate the driver's desired gear selection, such as park, reverse, neutral, drive, or manual mode.

The "B" circuit refers to one of the multiple circuits that make up the Transmission Mode Switch. Each circuit is responsible for sending a specific signal to the TCM. When the voltage in circuit "B" is higher than expected, it can cause the TCM to malfunction, leading to transmission problems.

This error code is often accompanied by other transmission-related trouble codes, and it may trigger the Check Engine Light to illuminate on the dashboard. If left unaddressed, this issue can lead to premature wear on transmission components, decreased fuel efficiency, and even complete transmission failure.

Possible Causes of Error P071F

  • Short circuit in the Transmission Mode Switch "B" Circuit
  • Wiring damage or corrosion in the "B" circuit
  • Transmission Mode Switch malfunction or failure
  • Transmission Control Module (TCM) malfunction or failure
  • Incorrect installation or adjustment of the Transmission Mode Switch
  • Corrosion or water damage in the transmission control system
  • Faulty or damaged transmission solenoids
  • Low transmission fluid level or dirty transmission fluid

Possible Fixes for Error P071F

  • Inspect the Transmission Mode Switch and "B" circuit for signs of damage, corrosion, or wear. Repair or replace as necessary.
  • Check the wiring and connections between the Transmission Mode Switch and the TCM for damage or corrosion. Repair or replace as necessary.
  • Use a scan tool to monitor the transmission system and identify any other trouble codes that may be related to the P071F code.
  • Perform a transmission fluid check and top off as necessary. Consider replacing the transmission fluid if it is dirty or degraded.
  • Consult a repair manual or a professional mechanic for guidance on adjusting or replacing the Transmission Mode Switch.
  • Consider replacing the TCM if it is malfunctioning or faulty.
  • Clear the P071F code and test drive the vehicle to see if the issue is resolved. If the code returns, further diagnosis and repair may be necessary.
Konnten Sie den richtigen OBDII-Code im Katalog nicht finden? Erhalten Sie professionelle Beratung von unserem intelligenten Assistenten und erfahren Sie noch heute die genaue Ursache des Problems.

Chat