EN / RU / ES / FR / DE

OBDII / EOBD Diagnose-Fehlercodes Definition

Wenn Ihr Auto mit OBD-II oder EOBD ausgestattet ist, haben Sie Zugriff auf über 5.000 generische OBD-II Diagnosefehlercodes (DTCs). Diese Codes decken verschiedene Fahrzeugsysteme ab, darunter Antriebsstrang (P0XXX, P2XXX, P34XX), Karosserie (B0XXX), Fahrwerk (C0XXX) und Netzwerk/Kommunikation (U0XXX, U2XXX, U3XXX). Zusätzlich gibt es mehr als 13.500 herstellerspezifische OBD-II-Codes, die dabei helfen, Probleme zu diagnostizieren, die spezifisch für verschiedene Automarken und -modelle sind. Stellen Sie sicher, dass Sie über die richtigen Werkzeuge verfügen, um diese Fehlercodes zu verstehen und zu beheben, damit Ihr Fahrzeug reibungslos läuft.

Mit diesen OBD-II-Codes können Sie effektiv Probleme im Zusammenhang mit Motorleistung, Sicherheitsfunktionen, Fahrwerk und vielen weiteren wichtigen Komponenten diagnostizieren.

Unterstützte Hersteller mit spezifischen OBD2 Codes:

Code eingeben:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error P0058

The OBDII error code P0058 is a specific trouble code that indicates a problem with the HO2S (Heated Oxygen Sensor) heater control circuit in Bank 2, Sensor 2. This code is typically triggered when the Engine Control Module (ECM) or Powertrain Control Module (PCM) detects an excessively high voltage in the heater control circuit.

In a modern vehicle, the HO2S is an essential component of the emissions control system. It measures the oxygen levels in the exhaust gases and sends this information to the ECM or PCM. The ECM or PCM then uses this data to adjust the air-fuel mixture to minimize emissions and optimize engine performance.

The HO2S heater is used to warm up the sensor quickly, allowing it to start taking accurate readings as soon as possible after engine start-up. The heater control circuit is responsible for powering the HO2S heater, and the ECM or PCM monitors the voltage in this circuit to ensure it is operating within the specified range.

Possible Causes of Error P0058

  • Wiring issues in the HO2S heater control circuit, such as short circuits, open circuits, or corrosion
  • HO2S heater element failure or malfunction
  • ECM or PCM failure or malfunction
  • HO2S sensor failure or malfunction
  • Excessive resistance in the HO2S heater control circuit
  • Short circuits or open circuits in the HO2S heater control circuit wiring
  • Corrosion or damage to the HO2S connector or wiring
  • HO2S heater control circuit voltage regulator failure

Possible Fixes for Error P0058

  • Inspect the HO2S heater control circuit wiring for any signs of damage, corrosion, or wear. Repair or replace the wiring as needed.
  • Check the HO2S heater element for any signs of failure or malfunction. Replace the HO2S heater element if necessary.
  • Use a scan tool to monitor the HO2S heater control circuit voltage and verify that it is within the specified range.
  • Check the ECM or PCM for any software updates or reprogramming requirements.
  • Replace the HO2S sensor if it is faulty or malfunctioning.
  • Check the HO2S connector and wiring for any signs of corrosion or damage. Clean or replace the connector and wiring as needed.
  • Use a multimeter to measure the resistance in the HO2S heater control circuit and verify that it is within the specified range.