EN / RU / ES / FR / DE

OBDII / EOBD Diagnose-Fehlercodes Definition

Wenn Ihr Auto mit OBD-II oder EOBD ausgestattet ist, haben Sie Zugriff auf über 5.000 generische OBD-II Diagnosefehlercodes (DTCs). Diese Codes decken verschiedene Fahrzeugsysteme ab, darunter Antriebsstrang (P0XXX, P2XXX, P34XX), Karosserie (B0XXX), Fahrwerk (C0XXX) und Netzwerk/Kommunikation (U0XXX, U2XXX, U3XXX). Zusätzlich gibt es mehr als 13.500 herstellerspezifische OBD-II-Codes, die dabei helfen, Probleme zu diagnostizieren, die spezifisch für verschiedene Automarken und -modelle sind. Stellen Sie sicher, dass Sie über die richtigen Werkzeuge verfügen, um diese Fehlercodes zu verstehen und zu beheben, damit Ihr Fahrzeug reibungslos läuft.

Mit diesen OBD-II-Codes können Sie effektiv Probleme im Zusammenhang mit Motorleistung, Sicherheitsfunktionen, Fahrwerk und vielen weiteren wichtigen Komponenten diagnostizieren.

Unterstützte Hersteller mit spezifischen OBD2 Codes:

Code eingeben:
+
P
-
+
0
-
+
0
-
+
0
-
+
0
-


Detailed Description of Error B0041

OBDII error code B0041 refers to a specific issue related to the airbag system in a vehicle. This code is typically associated with the Third Row Left Frontal Stage 1 Deployment Control, which is a part of the Supplemental Restraint System (SRS). The Third Row Left Frontal Stage 1 Deployment Control is responsible for controlling the deployment of the left frontal airbag in the third row of seats. The ''Subfault'' designation indicates that this is a secondary or derived fault, meaning that it is likely a symptom of a more fundamental problem elsewhere in the system.

The B0041 error code is usually triggered when the vehicle''s onboard computer, also known as the Airbag Control Module (ACM), detects an anomaly in the deployment control circuit for the Third Row Left Frontal Stage 1 airbag. This anomaly can manifest as an open circuit, a short circuit, or an incorrect signal from the sensor or actuator. As a result, the ACM will illuminate the airbag warning light on the dashboard and store the B0041 error code in its memory.

Possible Causes of Error B0041

The B0041 error code can be caused by a variety of factors, including:

  • Open or short circuit in the deployment control wiring for the Third Row Left Frontal Stage 1 airbag
  • Corrosion or damage to the connectors or terminals in the deployment control circuit
  • Failed or faulty sensor or actuator in the Third Row Left Frontal Stage 1 airbag deployment control circuit
  • Internal fault in the Airbag Control Module (ACM)
  • Software or calibration issue in the ACM
  • Third Row Left Frontal Stage 1 airbag module itself is faulty or damaged

Possible Fixes for Error B0041

To resolve the B0041 error code, the following steps can be taken:

  • Visually inspect the deployment control wiring and connectors for any signs of damage or corrosion
  • Use a multimeter to test the resistance and continuity of the deployment control circuit
  • Replace any faulty or damaged sensors, actuators, or wiring in the deployment control circuit
  • Update or reprogram the ACM software or calibration if necessary
  • Replace the Third Row Left Frontal Stage 1 airbag module if it is found to be faulty or damaged
  • Clear the B0041 error code from the ACM memory after completing any necessary repairs